Xyrek

Turn a STEP or STL into a dimensioned 2D drawing

Drop a 3D body from Fusion 360, FreeCAD, SolidWorks or Onshape and Xyrek projects all six faces plus an isometric, placing the measurements for you — overall sizes, hole Ø and locations, feature steps, hidden edges. Export a multi-page PDF drawing sheet, DXF that re-imports into CAD as sketches, and SVG.

Start — drop your part ▾ Manual & tutorials

FREE IN BETA · UNITS MM · NO SIGNUP · FILES DELETED AFTER CONVERSION

Drop a body on the sheet · or click to browse

Export STEP from your CAD (best — exact edges, holes, hidden lines) or STL. Fusion 360: File → Export → STEP. You get all six sides plus an isometric, with dimensions — as a PDF drawing sheet, SVG, and DXF you can pull back into CAD. Step-by-step guides in the manual.

PROJECTING VIEWS

01Upload a 3D body

A STEP or STL file from any CAD — Fusion 360, FreeCAD, SolidWorks, Onshape. Nothing to install, no signup; your file is deleted right after conversion.

02It gets dimensioned

Xyrek projects all six faces plus an isometric and places the measurements for you: overall sizes, hole Ø and locations, feature steps, dashed hidden edges. Click any measurement to drop it from the sheet.

03Download the drawing

A multi-page PDF drawing sheet with title block, DXF that re-imports into CAD as sketches, and SVG — all in millimetres, free while in beta.

PDF · a detail per face + 3D Download all (PDF + DXF + SVG) measure hidden edges Click any measurement to remove it from the sheet — click again to restore. Removals and the hidden-edge toggle apply to all downloads. DXF → CAD import steps are in the manual.